Filter
Top Products
10. Reinstall the cover back in place, and tighten the screws.
11. Reinstall the battery and turn the computer over again. Then reconnect the ac power adapter and
all cables.
To replace the memory module under the memory slot cover, do the following:
1. Turn off the computer, then disconnect the ac power adapter and all cables from the computer.
2. Close the computer display, and turn it over.
3. Remove the battery. See “Replacing the battery” on page 69.
4. Loosen the two screws on the memory slot cover, and then remove the cover.
5. If a memory module is already installed in the memory slot, press out on the latches on both edges of
the socket at the same time. Then remove the memory module and save it for future use.
80 User Guide