Filter
Top Products
• Set the TrackPoint as the main pointing device, and disable the touch pad.
• Set the touch pad as the main pointing device, and disable the TrackPoint.
Changing the UltraNav settings
You can change your settings of UltraNav in the UltraNav tab of the Mouse Properties window. To open it,
use one of the following methods:
• Use the Start menu of your computer as follows:
– For Windows 7: Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Mouse ➙ UltraNav.
– For Windows XP: Click Start ➙ Control Panel ➙ Printers and Other Hardware ➙ Mouse ➙ UltraNav.
You can also change the UltraNav settings by clicking the UltraNav icon on the system tray. To display the
UltraNav icon on the system tray, see “Adding the UltraNav icon to the system tray” on page 30.
Using the TrackPoint pointing device
The TrackPoint pointing device consists of a pointing stick 1 on the keyboard and three click buttons at the
bottom of the keyboard. To move the pointer 5 on the screen, you apply pressure to the nonslip cap on the
pointing stick in any direction parallel to the keyboard; the pointing stick itself does not move. The speed at
which the pointer moves depends on the pressure you apply to the pointing stick. The functions of the left 4
and right 2 click buttons correspond to those of the left and right mouse buttons on a conventional mouse.
The TrackPoint center button 3 , called the scroll bar, enables you to scroll Web pages or documents in any
direction with no need to use the graphic scroll bars on the side of the window.
If you are not familiar with the TrackPoint, these instructions will help you get started:
1. Place your hands in the typing position, and press gently with either index nger on the pointing stick in
the direction in which you want the pointer to move.
To move the pointer, press the pointing stick away from you to move it up, toward you to move it
down, to one side or the other to move it sideways.
Note: The pointer might drift. This is not a defect. Stop using the TrackPoint for a few seconds; the
pointer will stop moving.
2. To select and drag as required by your software, press the left or right click button with either thumb
and move the TrackPoint pointing stick.
Customizing the TrackPoint
You can customize the TrackPoint pointing device and its buttons as follows:
Chapter 2. Using your computer 27