Filter
Top Products
8. Slide the solid state drive or hard disk drive rmly into the connector 1 , and then reinstall the screws 2 .
9. Put the cover back in place 1 and close the cover 2 . Then tighten the screws 3 .
10. Reinstall the battery. For information about how to reinstall the battery, refer to “Replacing the battery”
on page 75
.
11. Turn the computer over again. Connect the ac power adapter and the cables to the computer.
Replacing a memory module
Before you start, print these instructions.
To replace a memory module, read the following prerequisites, and then the instruction.
Note: The operating speed of the memory module depends on the system conguration of your computer
and its combination with the memory module installed on your computer. In some conditions, the memory
module in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. The static electricity could damage the memory module.
80 User Guide