Filter
Top Products
Using the multi-touch touch pad
The touch pad of your computer supports multi-touch with which you can zoom in, zoom out, scroll or rotate
on the screen while browsing the Internet or reading or editing a document.
For details, refer to the Help in UltraNav.
Customizing the touch pad
To customize the touch pad, do as follows:
For Windows 7:
1. Click Start, and then click Control Panel.
2. Click Hardware and Sound, and then click Mouse.
3. Click the UltraNav tab and proceed to customizing the touch pad.
For Windows XP:
1. Click Start, and then click Control Panel.
2. Click Printers and Other Hardware, and then click Mouse.
3. Click the UltraNav tab and proceed to customizing the touch pad.
For details, refer to the Help in the ThinkPad SetUp.
Behavior of the UltraNav and an external mouse
If you attach an external mouse to a USB connector, you can use the external mouse simultaneously with the
TrackPoint and the touch pad.
Disabling the TrackPoint or the touch pad
If you want to disable the TrackPoint or the touch pad, do either of the following:
Congure settings in UltraNav properties window:
For Windows 7
1. Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Mouse.
2. Click the UltraNav tab.
3. To disable the TrackPoint, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
4. Click OK.
For Windows XP
1. Click Start ➙ Control Panel ➙ Printers and Other Hardware ➙ Mouse.
2. Click the UltraNav tab.
3. To disable the TrackPoint, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
4. Click OK.
Note: You can also open the UltraNav properties window by clicking the UltraNav icon in the task bar. For
details, refer to the instructions in “Adding the UltraNav icon to the system tray” on page 30
.
Chapter 2. Using your computer 29