Filter
Top Products
Universal Setup menu
Use To
Units of Measure
Inches
Millimeters
Specify the unit of measure.
Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.
Portrait Width
3–48 inches
76–1219 mm
Set the width for a portrait page orientation.
Notes:
• 8.5 inches is the US factory default setting. 216 mm is the
international factory default setting.
• If the specified width exceeds the maximum, then the printer uses
the maximum width allowed.
• The width can be increased in 0.01-inch or in 1-mm increments.
Portrait Height
3–48 inches
76–1219 mm
Set the height for a portrait page orientation.
Notes:
• 14 inches is the US factory default setting. 356 mm is the
international factory default setting.
• If the specified height exceeds the maximum, then the printer uses
the maximum height allowed.
• The height can be increased in 0.01-inch or in 1-mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction.
Notes:
• Short Edge is the factory default setting.
• Long Edge appears only when the paper or specialty media can be
loaded in either direction.
Reports menu
Reports menu
Use To
Menu Settings Page Print a report containing information about the paper loaded in trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information.
Device Statistics Print a report containing printer statistics such as supply information and details
about printed pages.
Network Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address information.
Note: This menu item appears only in network printers or in printers connected
to print servers.
Understanding printer menus 146