Filter
Top Products
To install a printer hard disk directly on the system board:
a
Hold the edges of the printed circuit board assembly, and then align the standoffs of the printer hard disk to
the holes in the system board. Press down on the printer hard disk until the standoffs are in place.
Warning—Potential Damage: Do not press on the center of the printer hard disk. Doing so may cause
damage to the hard disk.
b Use the two provided screws to attach the printer hard disk mounting bracket.
c Insert the plug of the printer hard disk interface cable into the receptacle of the system board.
Note: The plugs and receptacles are color‑coded.
Additional printer setup 28