Filter
Top Products
58 Too many trays attached
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
59 Incompatible tray [x]
Only options designed specifically for this printer are supported.
Try one or more of the following:
• Remove the specified tray.
• Select Continue to clear the message and continue printing without using the specified tray. For non‑touch‑screen
printer models, press
to confirm.
61 Remove defective disk
Try one or more of the following:
• Remove the defective printer hard disk.
• Install a different printer hard disk before performing any operations that require a printer hard disk.
62 Disk full
Try one or more of the following:
• Select Continue to clear the message and continue processing. For non‑touch‑screen printer models, press to
confirm.
• Delete fonts, macros, and other data stored in the printer hard disk.
• Install a printer hard disk with larger capacity.
80.xx Fuser near life warning
1 Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the
instruction sheet that came with the replacement part.
2 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to
confirm.
Troubleshooting 227