Filter
Top Products
34 Incorrect paper size, open [paper source]
Try one or more of the following:
• Load the correct paper size in the tray.
• Select Continue to clear the message and print the job using a different paper tray. For non‑touch‑screen printer
models, press
to confirm.
• Check tray length and width guides and make sure paper is properly loaded in the tray.
• For Windows users, check the Print Properties settings to make sure the print job is requesting the correct paper
size and type.
For Macintosh users, check the Print dialog settings to make sure the print job is requesting the correct paper size
and type.
• Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, then make sure the
paper is large enough for the data being printed.
• Cancel the current print job.
35 Insufficient memory to support Resource Save feature
Try one or more of the following:
• Select Continue to disable Resource Save and continue printing. For non‑touch‑screen printer models, press
to confirm.
• To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
• Install additional memory.
36 Printer service required
Select Continue to clear the message or contact customer support. For non‑touch‑screen printer models, press
to confirm.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
• Select Continue to stop the defragment operation and continue printing. For non‑touch‑screen printer models,
press
to confirm.
• Delete fonts, macros, and other data in the printer memory.
• Install additional printer memory.
Troubleshooting 222