Filter
Top Products
Use To
Audio Feedback
2
Button Feedback
On
Off
Volume
1–10
Set the audio volume for the buttons.
Notes:
• On is the factory default setting for Button Feedback.
• 5 is the factory default setting for Volume.
Show Bookmarks
2
Yes
No
Determine whether the Bookmarks icon is displayed.
Notes:
• Yes is the factory default setting.
• The Bookmarks icon appears in the Held Jobs area. If Show
Bookmarks is set to No, then the Held Jobs icon is
displayed only on the home screen if one or more held jobs
exist on the printer.
Web Page Refresh Rate
2
30–300
Specify the number of seconds between Embedded Web Server
refreshes.
Note: 120 seconds is the factory default setting.
Contact Name
2
Specify a contact name for the printer.
Location
2
Specify the location of the printer.
Note: The location will be stored on the Embedded Web Server.
Alarms
Alarm Control
Cartridge Alarm
Set an alarm to sound when the printer requires user
intervention.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
• For touch‑screen printer models, touch Cartridge Alarm,
and then select from the options.
• Single is the factory default setting. This setting sets the
alarm as three quick beeps.
• Off means no alarm will sound.
• Continuous repeats three beeps every 10 seconds.
Timeouts
Standby Mode
2
Disabled
1–240
Specify the number of minutes of inactivity before the system
enters a lower power state.
Note: 15 minutes is the factory default setting.
1
This menu appears only in non‑touch‑screen printer models.
2
This menu appears only in touch‑screen printer models.
Understanding printer menus 168