Filter
Top Products
Use To
Toner Darkness
1–5
Lighten or darken the printed output.
Notes:
• 4 is the factory default setting.
• Selecting a smaller number can help conserve toner.
• If Print Mode is set to Black Only, then a setting of 5 increases toner density and
darkness to all print jobs.
• If Print Mode is set to Color, then a setting of 5 is the same as a setting of 4.
Enhance Fine Lines
On
Off
Enable a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts.
Notes:
• Off is the factory default setting.
• To set Enhance Fine Lines from the software program, with a document open,
click File > Print, and then click Properties, Preferences, Options, or Setup.
• To set Enhance Fine Lines using the Embedded Web Server, type the printer IP
address in a Web browser.
Color Saver
On
Off
Reduce the amount of toner used for graphics and images. The amount of toner used
for text is not reduced.
Notes:
• Off is the factory default setting.
• On overrides Toner Darkness settings.
RGB Brightness
‑6 to 6
Adjust brightness in color outputs.
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
RGB Contrast
0–5
Adjust contrast in color outputs.
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
RGB Saturation
0–5
Adjust saturation in color outputs.
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
Understanding printer menus 177