4 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level
surface.
5 Load the paper stack with the recommended printable side faceup.
Notes:
• When loading preprinted letterhead for one‑sided printing, place the header faceup toward the front of the
tray.
• When loading preprinted letterhead for two‑sided printing, place the header facedown toward the rear of
the tray.
One‑sided printing Two‑sided printing
LETTERHEAD
LETTERHEAD
Note: Make sure the paper does not exceed the maximum paper fill indicator located on the left side of the tray.
Warning—Potential Damage: Overloading the tray can cause paper jams and possible printer damage.
6 Insert the tray.
Note: For some paper sizes, the tray will extend past the back of the printer.
Using C746x 52