Filter
Top Products
4 Close the printer top access cover, and then close the front door.
5 Depending on your printer model, touch Continue, jam cleared or press .
202–203 paper jams
If the jammed paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently pull it
out.
Note: Make sure all paper fragments are removed.
Paper jam in the fuser area
1 Open the front door.
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the front doors open
for more than 10 minutes.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
2 Open the printer top access cover.
3 Determine where the jammed paper is located, and then remove it:
a If the jammed paper is visible under the fuser, then firmly grasp the paper on each side, and then gently pull it
out.
Note: Make sure all paper fragments are removed.
b If the jammed paper is visible at the top paper guide in the fuser assembly, then firmly grasp the paper on each
side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
Clearing jams 209