Filter
Top Products
4 Press the arrow buttons until Ring Pattern appears, and then press .
5 Press the arrow buttons until the ring pattern that you want appears, and then press .
Setting a fax manual answer code
1 From the printer control panel, press .
2 Press the arrow buttons until Fax Setup appears, and then press .
3 Press the arrow buttons until Ringing and Answering appears, and then press .
4 Press the arrow buttons until Manual Pickup Code appears.
5 Enter the code you want to use.
Note: The code can include up to seven numbers, commas, periods, and/or these symbols: * # + - ( ).
6 Press to save the setting.
Setting up to fax while behind a PBX
If the printer is being used in a business or office, it may be connected to a Private Branch Exchange (PBX) telephone
system. Ordinarily, when dialing a fax number, the printer waits to recognize the dial tone and then dials the fax
number. However, this method of dialing may not work if the PBX telephone system uses a dial tone that is not
recognizable to most fax machines. The “Behind PBX (Dial Tone Detect Off)” feature enables the printer to dial the
fax number without waiting to recognize the dial tone.
1 From the printer control panel, press .
2 Press the arrow buttons until Fax Setup appears, and then press .
3 Press the arrow buttons until Dialing and Sending appears, and then press .
4 Press the arrow buttons until Dial Method appears, and then press .
5 Press the arrow buttons until Behind PBX appears, and then press to save the setting.
Managing faxes
Setting up a fax footer
1 From the printer control panel, press .
2 Press the arrow buttons until Fax Setup appears, and then press .
3 Press the arrow buttons until Fax Printing appears, and then press .
4 Press the arrow buttons until Fax Footer appears, and then press .
5 Press the arrow buttons until On appears, and then press to save the setting.
6 During the initial setup of your printer, you were prompted to enter the date and time. If you have not entered
this information:
a Press twice.
b Press the arrow buttons until Device Setup appears, and then press .
Faxing
108