Lexmark 5600 Series Printer User Manual


 
Use the To
6
Automatic Document Feeder (ADF) tray Load original documents in the ADF. Recommended for
scanning, copying, or faxing multiple-page documents.
Note: Do not load postcards, photos, small items, or thin
media (such as magazine clippings) into the ADF. Place
these items on the scanner glass.
7
Automatic Document Feeder (ADF) output tray Hold documents as they exit from the ADF.
8
Automatic Document Feeder (ADF) paper guide Keep paper straight when feeding into the ADF.
9
Printer control panel Operate the printer.
10
Paper exit tray Hold paper as it exits.
11
Memory card slots Insert a memory card.
12
Quick Connect laptop port
Note: Your printer model may not have this port.
Connect a laptop computer to the printer using a USB
cable.
Warning—Potential Damage: Do not touch the USB
port except when plugging in or removing a USB cable
or installation cable.
13
Card reader light Check card reader status. The light blinks to indicate that
a memory card is being accessed.
14
PictBridge port Connect a PictBridge-enabled digital camera or a flash
drive to the printer.
15
Wi-Fi indicator
Note: Your printer model may not have wireless
capability and may not have this indicator.
Check wireless status:
Off indicates that the printer is turned off, is powering
up, or is in Power Saver mode. In Power Saver mode,
the power light pulses on and off.
Orange
– indicates that the printer has not yet been
configured for a wireless network.
– indicates that the printer is configured for an ad hoc
connection, but is not communicating with another
ad hoc device.
Orange blinking indicates that the printer is
configured but is unable to communicate with the
wireless network.
Green indicates that the printer is connected to a
wireless network.
Setting up the printer
21