Filter
Top Products
Understanding printer messages
Message What this message means What you can do
Did You Replace
Fuser?
You have turned on the printer
while the fuser is in the warning
state and needs to be replaced.
• Press Select to reset the fuser
maintenance counter.
• Press Stop to continue. The
message continues to appear
each time you turn the printer on
while the fuser is in the warning
state.
Disabling Menus
The printer is responding to a
request to disable the menus.
• Wait for the message to clear.
• While the menus are disabled, you
cannot change the printer settings
from the operator panel.
See also:
Disabling operator panel menus
Disk Corrupted.
Reformat?
The printer has attempted a disk
recovery process and cannot
repair the disk.
• Press Go to reformat the disk and
delete all files currently stored on
the disk.
• Press Stop to clear the message
without reformatting the disk. The
printer may display Disk Recovery
and attempt to recover the disk.
See also:
Disk Recovery x/5 yyy%
Disk Recovery
x/5 yyy%
The printer is attempting to
recover the hard disk. Disk
recovery takes place in five
phases; the second line on the
operator panel display shows the
percent complete of the current
phase.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Enabling Menus
The printer is responding to a
request to make the menus
available to all users.
Wait for the message to clear, and
then press Menu to view the menus
from the operator panel.
Engine Warming
The printer is warming the fuser
assembly to prepare for printing.
Wait for the message to clear.
Enter PIN:
=___
The printer is waiting for you to
enter your four-digit personal
identification number (PIN).
Use the operator panel buttons to
enter the PIN you identified in the
driver when you sent the confidential
job to the printer.
See also:
Using the Print and Hold function
Fax <x>
The printer is processing an
incoming fax.
Wait for the message to clear.
Flushing Buffer
The printer is flushing corrupted
print data and discarding the
current print job.
Wait for the message to clear.
Understanding printer messages
96