Filter
Top Products
Using printer menus
Menu Item Purpose Values
Protocol To specify the parallel interface
protocol.
Standard May resolve some parallel
interface problems.
Fastbytes* Provides compatibility with most
existing parallel interface
implementations (recommended
setting).
PCL Emul Menu
Use the PCL Emul Menu to change printer settings that only affect jobs using the PCL emulation
printer language.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item Purpose Values
A4 Width To select the width of the logical
page for A4 size paper.
198 mm* Makes the logical page compatible
with the Hewlett-Packard LaserJet
5 Printer.
203 mm Makes the logical page wide
enough to print eighty 10-pitch
characters.
Auto CR after
LF
To specify whether the printer
automatically performs a carriage
return after a line feed control
command.
Off* Printer does not perform a carriage
return after a line feed control
command.
On Printer performs a carriage return
after a line feed control command.
Auto LF after
CR
To specify whether the printer
automatically performs a line feed
after a carriage return control
command.
Off* Printer does not perform a line
feed after a carriage return control
command.
On Printer performs a line feed after a
carriage return control command.
Font Name To choose a specific font from the
specified font source.
R0 Courier
10*
The font name and font ID for all
fonts in the selected font source
are displayed. The font source
abbreviation is R for resident, F for
flash, K for disk, and D for
download.
PCL Emul Menu
63