Filter
Top Products
Using printer menus
Menu Item Purpose Values
Toner
Darkness
To lighten or darken printed output, or
conserve toner.
Note: Setting Toner Darkness to
values of 1, 2, or 3 is only effective
when using the PostScript driver.
5 If Print Mode is Black & White,
a setting of 5 increases toner
density and darkness to all
print jobs (PCL or PostScript).
If Print Mode is Color, a setting
of 5 is the same as 4.
4* Default toner darkness setting.
3 Reduction in toner
consumption.
2 Further reduction in toner
consumption.
1 Maximum reduction in toner
consumption.
Finishing Menu
Use the Finishing Menu to define how the printer delivers the printed output.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item Purpose Values
Blank Pages To specify whether to include
program-generated blank pages
as part of your printed output.
Do Not Print* Does not print program-generated
blank pages as part of your job.
Print Prints program-generated blank
pages as part of your job.
Collation To keep the pages of a print job
stacked in sequence when printing
multiple copies of the job.
Off* Prints each page of a job the
number of times specified by the
Copies menu item. For example, if
you set Copies to 2 and send three
pages to print, the printer prints
page 1, page 1, page 2, page 2,
page 3, page 3.
On Prints entire job the number of
times specified by the Copies
menu item. For example, if you set
Copies to 2 and send three pages
to print, the printer prints page 1,
page 2, page 3, page 1, page 2,
page 3.
Copies To set the number of copies you
want for the printer default value.
(Set the number of copies required
for a specific job from the printer
driver. Values selected from the
printer driver always override
values selected from the operator
panel.)
1...999 (1*)
Finishing Menu
52