Filter
Top Products
Maintenance
If the message Did you replace Fuser? or Did you replace Belt? appears, press Go.
Otherwise, use the following steps to reset the fuser or transfer belt counter.
Note: Although the fuser is shown, the same procedure is used to clear the transfer belt.
1 Press Menu until SUPPLIES MENU appears on the second line of the display.
SUPPLIES MENU
1
Menu
2
Select
3
Return
4
Go
5
Stop
6
2 Press Select to open the SUPPLIES MENU.
3 Press Menu until REPLACE SUPPLIES appears on the second line of the display.
SUPPLIES MENU
REPLACE SUPPLIES
1
Menu
2
Select
3
Return
4
Go
5
4 Press Select to open Replace Supplies.
Stop
6
Resetting the maintenance counter
171