Filter
Top Products
Maintenance
5 Push the waste toner arm until it connects with the photodeveloper and snaps into place.
6 Repeat steps 2 through 5 to install additional photodevelopers.
CAUTION: Before closing the top cover make sure everyone is away from the printer and the
area under the cover is free of hands, clothing, and other items.
7 Close the top cover and the front door.
Note: If you need instructions on how to close the top cover, see Closing the top cover.
For instructions about replacing other supply items, click one of the following headings:
Removing the duplex unit
Replacing the transfer belt
Replacing the fuser
Your printer monitors the life of your fuser. When the fuser reaches the end of its life, the printer
displays
80 Fuser Exhausted. This message indicates it is time for you to replace the fuser. For
best print quality, make sure you replace the fuser when the printer displays
80 Fuser
Life Warning.
Press
Go to clear the message. The Supplies message appears on the second line of the display to
remind you that supplies need attention. You can open the Supplies Menu to see the
80 Fuser
Exhausted and 80 Fuser Life Warning messages.
Replacing the fuser
143