Filter
Top Products
Using printer menus
Menu Item Purpose Values
Prime
Stapler
The staple priming operation is mostly required when a user loads a new staple
cartridge in the stapler device. However, this operation may also be required when a
staple jam has occurred as part of the staple jam clearing procedure.
Reset Printer To reset the printer to the user default value for each menu item, delete all downloaded
resources (fonts, macros, and symbol sets) stored in printer memory (RAM), and delete
all data in the interface link buffer.
Before selecting Reset Printer, exit the software program you are using.
Network Menu
Use the Network Menu to change printer settings affecting jobs sent to the printer through a network
port (either Standard Network or Network Opt <x>).
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item Purpose Values
Job
Buffering
To temporarily store jobs on the
printer hard disk before printing.
Note: Changing this menu item
automatically resets the printer.
Off* Does not buffer jobs to the hard
disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer
is busy processing data from
another input port.
MAC Binary
PS
To configure the printer to process
Macintosh binary PostScript print
jobs.
On Printer processes raw binary
PostScript print jobs from
computers using the Macintosh
operating system.
Note: This setting often causes
Windows print jobs to fail.
Off Printer filters PostScript print jobs
using standard protocol.
Auto* Printer processes print jobs from
computers using either Windows
or Macintosh operating systems.
Network
Buffer
To configure the size of the
network input buffer.
Note: Changing the Network
Buffer menu item automatically
resets the printer.
Auto* Printer automatically calculates the
Network Buffer size
(recommended setting).
3K to
maximum
size allowed
User specifies the Network Buffer
size. The maximum size depends
on the amount of memory in your
printer, the size of the other link
buffers, and whether Resource
Save is set to On or Off. To
maximize the range for the
Network Buffer size, disable or
reduce the size of the parallel,
serial, and USB buffers.
Network Menu
59