Filter
Top Products
Maintenance
The printer continues to display the Supplies message until you replace the fuser. To replace the
fuser, use the following steps or the instruction sheet supplied with the fuser.
Preparing for maintenance
1 Turn the printer on.
2 Follow the instructions in the table for the message your printer is displaying.
Primary message Secondary message What you should do
80 Fuser Life Warning Select = Replace
Go = Continue
Press Select if you want to
replace the fuser now.
Press Go if you want to wait to
replace the fuser.
80 Fuser Exhausted Select = Replace Press Select to replace the
fuser.
80 Fuser/Belt
Life Warning
Select = Replace
Go = Continue
Press Select if you want to
replace the fuser now.
Press Go if you want to wait to
replace the fuser.
80 Fuser/Belt Exhausted Select = Replace Press Select to replace the
fuser.
The Preparing for Maintenance message appears while the printer moves parts into
position. After the parts are in position, the message Printer Ready for Maintenance
appears, followed by Power Off to Replace Items.
3 Turn the printer off.
Removing the fuser
1 Complete the steps in Preparing for maintenance.
2 Make sure the printer is turned off.
Replacing the fuser
144