Filter
Top Products
6
Chapter 1: The basics
Using a USB cable If you are connecting your printer to a PC with a USB
(Universal Serial Bus) cable, follow the instructions
below.
1 Make sure your computer and printer are turned
off.
2 Connect the USB cable to the port on the back of
your computer.
3 Connect the other end of the cable to the USB
port on the back of your printer.
4 Turn on your computer and your printer.
5 When the Add New Hardware Wizard screen
appears:
a Select Next to begin searching for new drivers.
b Select Next to search for best driver.
c At the next screen, deselect the floppy disk
drives box and Microsoft Windows update
box and select the Specify Location box.
d Insert the CD that came with your printer, then
select Browse.
e Select the letter of your CD drive and highlight
the Win98USB folder.
f Select OK, Next, Next.
g When the hardware is loaded, click Finish.
The CD is automatically launched.
6 Follow the installation instructions on the
printer drivers screen.
7 Select the LPT1 port as your default printer port.
8 When you are finished, exit the CD.
9 Restart your computer.