Filter
Top Products
12
Chapter 1: The basics
1 Turn the printer off.
2 Plug one end of the power cord into the power
cord connector on the back of the printer and
the other end into a properly grounded wall
outlet.
3 Turn on the printer.
As the printer powers up, each operator panel light
turns on and off, starting with Press Button and
ending with the Ready light. If this does not
happen, see “Printing problems” on page 36.
4 When the Data light stops blinking and Ready
is the only light on, briefly press the operator
panel button.
A test page listing your printer model and default
settings should print out. If it doesn’t, check
“Printing problems” on page 36.
Attaching a new
operator panel
overlay
If you have a non-English overlay sheet in your printer
box and wish to use it, peel it off and place it over the
overlay currently on your printer.
Troubleshooting Tips
Problem: What to do:
The operator panel lights do not
come on when the printer is turned
on.
• Make sure the power cord is firmly plugged in at the back of the printer
and at the wall outlet.