Filter
Top Products
61
Appendix B: Advanced troubleshooting
B
Advanced
troubleshooting
If you contact the Lexmark Technical Support Center to
help you resolve a printing problem, they may guide
you through configuration mode to change a default
setting (i.e., turning on the PPDS Activated setting if
your job application uses the PPDS datastream).
Use the operator panel or the MarkVision remote
operator panel to set or change specific printer
functions in configuration mode.
The following settings may be selected while in
configuration mode:
• Parallel Port Settings
– Enable Port
– NPA Mode
– Protocol
– Mode 1
– Mode 2
– Strobe Adjust
• USB Settings
– Enable Port
– NPA Mode
• PPDS Activated
• Auto LFCR after CRLF