Filter
Top Products
69
Appendix B: Advanced troubleshooting
If your printer lights look like
this in configuration mode:
Then your printer: Factory
Default
Parallel Strobe Adjust setting is off (0), the factory default.
This setting lets you increase the amount of time strobe is
sampled to determine that valid data is available on the
parallel port.
• Do a brief button press to scroll through the settings
(0ff=0, On=+1, Auto=+2) for this menu item.
• Do a double button press to scroll to the next menu item,
USB Port Enabled.
• Do a long button press to select and save a setting for
this menu. As the setting is saved, all operator panel
indicator lights remain on for approximately 2 seconds.
Turn off the printer to exit Configuration Mode.
0