Filter
Top Products
62
Appendix B: Advanced troubleshooting
To enter configuration mode you must be in the Special
Function Menu:
1 Turn off the printer.
2 Open the top cover.
3 Turn the printer back on.
4 When the Error light comes on, indicating the
top cover is open, do a double button press.
5 When the Error light and Press Button light
blink, close the cover.
6 Do a double button press twice to scroll down to
Enter Configuration Mode.
When the Enter Configuration Mode setting is
selected, the operator panel Load Paper light is on
solid, the Error light is blinking and the Press
Button light is blinking.
7 Do a long button press to initiate Configuration
Mode.
This illustration represents the operator panel
settings
in configuration mode when an indicator light
is on solid.
When the printer is in configuration mode, the
indicator lights take on new meanings based on their
function.
The following tables describe the function of
each of these settings.