Filter
Top Products
64
Appendix B: Advanced troubleshooting
If your printer lights look like
this in configuration mode:
Then your printer: Factory
Default
Parallel Protocol setting is set to Fastbytes, the factory
default.
When the protocol is set to Fastbytes, the printer receives
information at a much faster transmission rate, provided the
host computer supports Fastbytes.
When the protocol is set to Standard, the printer receives
information at a normal transmission rate. The Press
Button light is off when Parallel Protocol is set to Standard.
• Do a brief button press to change the setting (Fastbytes,
Standard).
• Do a double button press to scroll to the next menu item,
PPDS Activated.
• Do a long button press to select and save a setting for
this menu. As the setting is saved, all operator panel
indicator lights remain on for approximately 2 seconds.
Turn off the printer to exit Configuration Mode.
Fastbytes