Filter
Top Products
71
Appendix B: Advanced troubleshooting
If your printer lights look like
this in configuration mode:
Then your printer: Factory
Default
USB NPA Mode setting is set to Auto, the factory default.
When USB NPA Mode is enabled, your computer can send
print jobs to the printer and query printer status information
simultaneously.
• Do a brief button press to scroll through the settings (Off,
On, Auto) for this menu item.
• Do a double button press to scroll to the next menu item,
Parallel Port Enabled.
• Do a long button press to select and save a setting for
this menu. As the setting is saved, all operator panel
indicator lights remain on for approximately 2 seconds.
Turn off the printer to exit Configuration Mode.
Auto