Filter
Top Products
Part name Lexmark Return Program Regular
Imaging unit 500Z 500ZA
Ordering staple cartridges
Part name Part number
Staple cartridges 35S8500
Ordering a maintenance kit
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick rollers, transfer roller, and redrive assembly are all included in the maintenance
kit and can be individually ordered and replaced if necessary.
• Contact your service representative to replace the maintenance kit.
Maintenance kit Part number
100‑V maintenance kit
*
40X9147
110‑V maintenance kit 40X9137
220‑V maintenance kit 40X9138
*
This is available only in Japan.
Ordering an ADF separator roller
Order an ADF separator roller when the ADF fails to pick paper or picks more than one sheet of paper at a time.
For information on replacing the ADF separator roller, see the instruction sheet that came with the part.
Part name Part number
Separator roller 40X9108
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
• Direct sunlight
• Temperatures above 35°C (95°F)
• High humidity above 80%
• Salty air
• Corrosive gases
• Heavy dust
Maintaining the printer 224