Filter
Top Products
Installing or removing a memory card
87
Installing and removing options
Installing or removing a memory card
Installation
Note: MFP or printer memory cards designed for other Lexmark MFPs or printers may not work with this
MFP.
1 Remove the system board access cover. (See Accessing the MFP system board.)
Warning: MFP memory cards are easily damaged by static electricity. Touch something metal such as the MFP
frame before you touch a memory card.
2 Push open the latches on both ends of the memory card connector.
3 Unpack the memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
4 Align the notches on the bottom of the card with the notches on the connector.
5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6 Make sure each latch fits over the notch on the end of the card.
Memory connector
Memory card