Filter
Top Products
Custom Scan Sizes menu
Use To
Custom Scan Size [x]
Scan Size Name
Width
1–11.69 inches (25–297 mm)
Height
1–17 inches (25–432 mm)
Orientation
Portrait
Landscape
2 scans per side
Off
On
Specify a custom scan size name, scan sizes, and options. The custom scan size
name replaces Custom Scan Size [x] in the printer menus.
Notes:
• 11.69 inches is the US factory default setting for Width. 297 millimeters
is the international factory default setting for Width.
• 17 inches is the US factory default setting for Height. 432 millimeters is
the international factory default setting for Height.
• Portrait is the factory default setting for Orientation.
• Off is the factory default setting for “2 scans per side.”
Custom Names menu
Use To
Custom Name [x]
[none]
Specify a custom name for a paper type. This name replaces Custom Type [x] in
the printer menus.
Universal Setup menu
Use To
Units of Measure
Inches
Millimeters
Specify the unit of measure.
Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.
Portrait Width
3–48 inches
76–1219 mm
Set the width for a portrait page orientation.
Notes:
• 8.5 inches is the US factory default setting. 216 mm is the
international factory default setting.
• If the specified width exceeds the maximum, then the printer uses
the maximum width allowed.
• The width can be increased in 0.01-inch or in 1-mm increments.
Portrait Height
3–48 inches
76–1219 mm
Set the height for a portrait page orientation.
Notes:
• 14 inches is the US factory default setting. 356 mm is the
international factory default setting.
• If the specified height exceeds the maximum, then the printer uses
the maximum height allowed.
• The height can be increased in 0.01-inch or in 1-mm increments.
Understanding the printer menus 144