Lexmark X748DE Printer User Manual


 
Finishing menu
Use To
Sides (Duplex)
1 sided
2 sided
Specify whether twosided (duplex) printing is set as the default for all print jobs.
Notes:
1 sided is the factory default setting.
When two-sided printing is selected and the media is not the same on both
sides, the media must be loaded in the trays in a different orientation.
When two-sided printing is selected and the media is not the same on both
sides, the media must be loaded in the trays in a different orientation.
You can set twosided printing in the software program. For Windows users,
click File > Print, and then click Properties, Preferences, Options, or Setup. For
Macintosh users, choose File > Print, and then adjust the settings from the
print dialog and popup menus.
Duplex Binding
Long Edge
Short Edge
Define binding for duplexed pages in relation to paper orientation.
Notes:
Long Edge is the factory default setting. Long Edge assumes binding along the
long edge of the page (left edge for portrait and top edge for landscape).
Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Copies
1–999
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Blank Pages
Do Not Print
Print
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Stack the pages of a print job in sequence when printing multiple copies.
Notes:
Off is the factory default setting.
On stacks the print job in sequence.
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Specify whether blank separator sheets are inserted.
Notes:
Off is the factory default setting.
Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to On. If Collate is set to Off, then a blank page is inserted
between each set of printed pages, such as after all page 1's and after all page
2's.
Between Jobs inserts a blank sheet between print jobs.
Between Pages inserts a blank sheet between each page of a print job. This
setting is useful when printing transparencies or when inserting blank pages in
a document.
Separator Source
Tray [x]
Manual Feeder
Specify the paper source for separator sheets.
Note: Tray 1 (standard tray) is the factory default setting.
Understanding the printer menus 204