Filter
Top Products
Use To
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Specify how the original document was produced.
Note: Color Laser is the factory default setting.
Color
On
Off
Specify whether or not copies are printed in color.
Note: On is the factory default setting.
Allow color copies
On
Off
Enable or disable color in copying.
Notes:
• On is the factory default setting.
• Setting this to Off will hide all color‑specific menus.
• This setting overrides the Color setting.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specify whether an original document is two‑sided (duplex) or one‑sided (simplex),
and then to specify whether the copy should be two‑sided or one‑sided.
Notes:
• 1 sided to 1 sided—The original document has print on one side and the copy
will also have print on one side.
• 1 sided to 2 sided—The original document has print on one side, while the
copy will have print on both sides.
• 2 sided to 1 sided—The original document has print on both sides, while the
copy will have print on just one side.
• 2 sided to 2 sided—The original document has print on both sides, and the
copy will also have print on both sides.
Paper Saver
Off
2–up Portrait
4–up Portrait
2–up Landscape
4–up Landscape
Allow copying of two or four sheets of a document on one page.
Note: Off is the factory default setting.
Print Page Borders
On
Off
Specify whether or not a border is printed.
Note: Off is the factory default setting.
Collate
Off [1,1,1,2,2,2]
On [1,2,1,2,1,2]
Keep the pages of a print job stacked in sequence when printing multiple copies.
Note: On is the factory default setting.
Understanding the printer menus 175