Filter
Top Products
Chapter 4
Advanced Configuration
15
10/100 4-Port VPN Router
Some Internet applications or games use alternate ports
to communicate between the server and LAN host. When
you want to use these applications, enter the triggering
(outgoing) port and alternate incoming port in the
Port Triggering table. Then the Router will forward the
incoming packets to the LAN host.
Application Name Enter the name of the application.
Trigger Port Range Enter the starting and ending port
numbers of the trigger port range.
Incoming Port Range Enter the starting and ending port
numbers of the incoming port range.
Click Add to List, and configure as many entries as you
would like, up to a maximum of 30. To delete an entry,
select it and click Delete selected application.
Click Show Tables to see the details of your entries. The
Port Range Forwarding Table List appears.
Port Range Forwarding Table List
Port Range Forwarding Select this option to view the
Port Range Forwarding entries.
Port Triggering Select this option to view the Port
Triggering entries.
Port Triggering Table List
Click Refresh to update the on-screen information. Click
Close to exit this screen and return to the Forwarding
screen.
On the Forwarding screen, click Save Settings to save your
changes, or click Cancel Changes to undo them.
Setup > UPnP
Universal Plug and Play (UPnP) can be used to set up
public services on your network. When the UPnP function
is enabled, Windows XP or Vista can modify these entries
via UPnP.
Setup > UPnP
UPnP
UPnP Function Select Yes to enable the UPnP function.
Otherwise, keep the default, No.
Service Select the Service you want.
Name or IP Address Enter the name or IP address of the
server that you want the Internet users to access.
Enable Select Enable to enable this UPnP entry.
If the Service you need is not listed in the menu, click
Service Management to add the new service. The Service
Management screen appears.
Service Management
Service Name Enter a name.
Protocol Select the protocol it uses.
External Port Enter the external port number.
Internal Port Enter the internal port number.
Click Add to List. Click Save Settings to save your changes,
or click Cancel Changes to undo them. Click Exit to return
to the UPnP screen.