Filter
Top Products
136
Chapter 7:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Chapter
7
– 127.0.0.0 to 127.255.255.255.
• UDP Destination Port— Indicate the destination UDP port ID number of the relayed UDP packets.
The following table lists UDP Port allocations
• Destination Address— The IP interface that receives UDP packet relays. If this field is 0.0.0.0,
UDP packets are discarded. If this field is 255.255.255.255, UDP packets are flooded to all IP
interfaces.
3. Define the relevant fields.
4. Click Apply. The UDP Relay Settings are defined, and the device is updated.
DHCP Relay
The DHCP Relay Page provides information for establishing a DHCP configuration with multiple
DHCP servers to ensure redundancy. IP Addresses are controlled and distributed one-by-one to avoid
overloading the device
1. Click System > System Management > IP Addressing > DHCP Relay. The DHCP Relay Page
opens:
DHCP Relay Page
The DHCP Relay Page contains the following fields:
• DHCP Relay— Enable or Disables DHCP on the device.
• DHCP Server — Adds a DHCP Server to the DHCP Relay Table. The DHCP servers act as a
DHCP relay if the parameter is not equal to 0.0.0.0. DHCP requests are relayed only if their SEC
field is greater or equal to the threshold value. This allows local DHCP Servers to respond first.
2. Click the Add button. The Add DHCP Server Page opens: