Filter
Top Products
68
Chapter 4:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
– Disable — Disables port-based authentication on the device. This is the default.
• Guest VLAN ID — Displays the Guest VLAN ID.
2. Define the relevant fields.
3. Click Apply. The 802.1X properties are defined, and the device is updated.
Defining Port Authentication
1. Click Security Suite > 802.1X > Port Authentication. The 802.1X Properties Page opens:
802.1X Port Authentication Page
The 802.1X Port Authentication Page contains the following fields:
• Copy From Entry Number — Indicates the row number from which port authentication parameters
are copied.
• To Entry Number(s) — Indicates the row number to which port authentication parameters are
copied.
• Unit Number — Displays the stacking member for which the port authentication parameters are
displayed.
• Port — Indicates the port name.
• User Name — Displays the user name.
• Current Port Control — Displays the admin port authorization state.
• Guest VLAN — Displays the Guest VLAN.