Filter
Top Products
140
Chapter 7:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Chapter
7
ARP Settings Page
The ARP Settings Page contains the following fields:
• Interface — Indicates the interface connected to the device.
• IP Address — Indicates the station IP address, which is associated with the MAC address filled in
below.
• MAC Address — Indicates the station MAC address, which is associated in the ARP table with the
IP address.
• Status — Indicates the ARP Table entry status. Possible field values are:
– Dynamic — Indicates the ARP entry was learned dynamically.
– Static — Indicates the ARP entry is a static entry.
3. Define the relevant fields.
4. Click Apply. The ARP Settings are modified, and the device is updated.
Defining IP Routing
Once the switch has been defined as a router, statics routes can be defined. To define IP Routing:
1. Click Routing > IP Routing. The IP Routing Page opens: