Lucent Technologies P332MF Switch User Manual


 
Chapter 6 Cajun Campus CLI Layer 2
44 Cajun P332MF Users Guide
Example:
Cajun_P330-N> show snmp timeout
the SNMP Timeout is 2000
Show timeout Command
Use the show timeout command to display the amount of time the CLI can
remain idle before timing out in minutes. If the result is 0, there is no timeout limit.
The syntax for this command is:
show timeout
Example:
Cajun_P330-N> show timeout
CLI timeout is 10 minutes
Show interface Command
Use the show interface command to display information on network
interfaces.
The syntax for this command is:
show interface
Example:
To display the interface:
Cajun_P330-N> show interface
Interface Name VLAN IP address Netmask
-------------- ---- --------------- ---------------
inband 1 149.49.42.252 255.255.255.0
ppp 1 0.0.0.0 0.0.0.0