Filter
Top Products
Chapter 6 Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide 81
Example:
These examples show how to use the set port flowcontrol command set:
Cajun_P330-N# set flowcontrol receive 1/51 on
Port 1/51 flow control receive administration status set to on
(port will require far end to send flowcontrol)
Cajun_P330-N# set flowcontrol send 1/51 off
Port 1/51 flow control send administration status set to off
(port will send flowcontrol to far end)
Cajun_P330-N# set flowcontrol all 1/17 proprietary
Port 1/17 flow control administration status set to
proprietary
Set auto-negotiation-flowcontrol-advertisement Command
The set auto-negotiation-flowcontrol-advertisement command sets the
flowcontrol advertisement for a Gigabit port when performing autonegotiation.
The syntax for this command is:
set auto-negotiation-flowcontrol-advertisement <mod_num>/
<port_num> {no-flowcontrol|asym-tx-only|sym-only|sym-and-asym-rx}
all Controls the sending and receipt of flow-control frames for any type
of ports:
• ON indicates that the local port will both act upon and send
IEEE802.3x flow control frames
• OFF indicates that the local port will both discard and not send
flow control frames (of any type)
• PROPRIETARY indicates that the local port will both act upon and
send Lucent proprietary flow control frames.
no-flowcontrol The port will advertise no pause capabilities
asym-tx-only The port will advertise asymmetric Tx pause capabilites only
sym-only The port will advertise symmetric pause capabilites only
sym-and-asym-rx The port will advertise both symmetric and asymmetric Rx
pause capabilites