Filter
Top Products
Chapter 6 Cajun Campus CLI – Layer 2
46 Cajun P332MF User’s Guide
Show port trap Command
Use the show port trap command to display information on SNMP generic
link up/down traps sent for a specific port.
The syntax for this command is:
show port trap [<mod_num>[/<port_num>]]
Example:
Cajun_P330-N> show port trap 1/1
Port 1/1 up/down trap is disabled
Show port channel Command
Use the show port channel command to display Link Agreggation Group
(LAG) information for a specific module or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]]
Example:
show port channel 1
Port Channel Status Channel Name
------ --------------- --------------------------------
1/1 off
1/2 off
1/3 on server1
1/4 on server1
1/13 off
1/14 off
1/15 off
1/16 off
------ --------------- --------------------------------
1/5 off
etc...
Note: Ports are listed and grouped according to the possible LAG membership.