Filter
Top Products
Chapter 6 Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide 47
Show port redundancy Command
Use the show port redundancy command to display information about all
redundancy schemes defined for this stack.
The syntax for this command is:
show port redundancy
Example:
Cajun_P330-N> show port redundancy
Redundancy Name Primary Port Secondary Port Status
----------------- -------------- ---------------- --------
uplink 1/7 2/12 enable
Show port mirror Command
Use the show port mirror command to display mirroring information for the
stack.
The syntax for this command is:
show port mirror [<mod_num>[/<port_num>]]
Example:
Cajun_P330-N> show port mirror
port mirroring
Mirroring both Rx and Tx packets from port 1/2 to port 1/4 is
enabled
Show module Command
Use the show module command to display module status and information. For
each module with an expansion sub-module installed, both module and sub-
module type and information are shown.
The syntax for this command is:
show module [<mod_num>]
mod_num (Optional) Number of the module. If you do not specify a
number, all modules are shown.