Filter
Top Products
Chapter 6 Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide 69
Set logout Command
The set logout command is used to set the number of minutes until the system
automatically disconnects an idle session.
The syntax for this command is:
set logout <timeout>
Example:
To set the number of minutes until the system disconnects an idle session
automatically:
Cajun_P330-N# set logout 20
Sessions will be automatically logged out after 20 minutes of
idle time.
To disable the automatic disconnection of idle sessions:
Cajun_P330-N# set logout 0
Sessions will not be automatically logged out.
• set intelligent-
multicast router-
port-pruning time
Sets the aging time for router ports Page 86
• set intelligent-
multicast group-
filtering-delay
time
Sets the time delay before a filter is
applied to a specific group
Page 86
• set secure mac Adds a unicast MAC addres into the
CAM table of a secured port
Page 86
• set security mode Enables or disables the stack’s MAC
security
Page 87
• set port security Enables MAC security on a range of
ports
Page 87
timeout Number of minutes (0 to 999) until the system automatically
disconnects an idle session. Setting the value to 0 disables the
automatic disconnection of idle sessions (default is 15
minutes).