Filter
Top Products
Chapter 6 Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide 51
Following are the show trunk command output fields:
Show spantree Command
Use the
show spantree command to display spanning-tree information.
The syntax for this command is:
show spantree [<mod_num>[/<port_num>]]
Example:
Cajun_P330-N> show spantree
Spanning tree enabled
Designated Root: 00-40-0d-88-06-c8
Designated Root Priority: 32768
Designated Root Cost: 20
Designated Root Port: 1/1
Root Max Age: 20 Hello Time: 2
Bridge ID MAC ADDR: 00-40-0d-92-04-b4
Bridge ID priority: 32768
Port State Cost Priority
------ ------------- ---------- ------------
1 /1 Forwarding 20 128
1 /2 not-connected 20 128
1 /3 LAG-member 20 128
1 /4 LAG-member 20 128
1 /5 not-connected 20 128
Field Description
Port Module and port number(s)
Mode Tag status of the port (ON - dot1Q tagging mode,
OFF - clear mode).
Native VLAN Number of the Port VLAN ID (the VLAN to which
received untagged traffic will be assigned). If the Port is in
“clear mode” only frames of this VLAN will be
transmitted.
VLANs allowed on trunk Range of values allowed for the Native VLAN (1 to 3071)