Filter
Top Products
Chapter 6 Cajun Campus CLI – Layer 2
70 Cajun P332MF User’s Guide
Set timezone Command
Use the set timezone command to assign a timezone name and set the time
difference of your Cajun P330 relative to the Coordinated Universal Time (UTC/
GMT). The minutes paramater can only be set to 30.
The syntax for this command is:
set timezone <zone_name> [-]<hours>[:30]
Example:
set timezone GMT -3:30
Timezone set to 'GMT', offset from UTC is -3:30 hours
Set ntp server Command
The set ntp server command is used to set the NTP server address.
The syntax for this command is:
set ntp server <ip>
Set ip route Command
Use the set ip route command to add IP addresses to the IP routing table. You
can configure from one to ten (10) default gateways for a Cajun P330 stack.
The syntax for this command is:
set ip route <destination> <gateway>
ip IP address of the ntp server.
destination IP address of the network, or specific host to be added
gateway IP address of the router.