Filter
Top Products
Chapter 6 Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide 83
Set spantree priority Command
Use the set spantree priority command to set the bridge priority for STP.
The syntax for this command is:
set spantree priority <bridge_priority>
Example:
This example shows how to set the bridge priority to 45000:
Cajun_P330-N# set spantree priority 45000
Bridge priority set to 45000.
Set autopartition Command
Use the set autopartition command to enable or disable auto-partitioning
on all the half duplex ports of the stack.
The syntax for this command is:
set autopartition {enable|disable}
Example:
Cajun_P330-N# set autopartition enable
Auto-partition is enabled.
Set license Command
The set license command enables you to activate the SMON capability of the
Cajun™ P330 stack. A Cajun P330 stack can include several Cajun P330 modules.
One SMON license is required per Cajun P330 stack. Installing the license is very
simple. It involves connecting a terminal to one of the Cajun P330 modules and
typing in a valid license number (included in the SMON License pack) using the
CLI.
For a full description of the SMON License and the installation procedure please
refer to the Installation Guide provided with the SMON License.
bridge_priority Number representing the priority of the bridge.
The priority level is from 0 to 65535, with 0 indicating high
priority and 65535 indicating low priority.