Filter
Top Products
Chapter 6 Cajun Campus CLI – Layer 2
84 Cajun P332MF User’s Guide
Set internal buffering Command
The set internal buffering command allows you to set the size (either
Maximum or Minimum) of the Receive (Rx) buffer allocated to each port of the
specified module. This command is meaningless when any port of the module is
operating with flow control ON.
The syntax for this command is:
set internal buffering <mod_num> {max|med|min}
Example:
Cajun_P330-N> set internal buffering 1 max
Done.
Set intermodule port redundancy Command
Use the set intermodule port redundancy command to define or delete the
stack’s unique intermodule redundancy scheme. The defined scheme can be
enabled or disabled using the reversed
set port spantree enable/disable
command
.
The syntax for this command is:
set intermodule port redundancy <module/prim-port> <module/
second-port> { on | off } [<name>]}
Example:
Cajun_P330-N> set intermodule port redundancy 1/7 2/12 on
backbone
backbone: port 2/12 is intermodule redundant to port 1/7
max Sets the internal receive buffer to its maximum size.
med Sets the internal receive buffer capacity dynamically
min Sets the internal receive buffer to its minimum size (this is the
Default).
<module/prim-port> the primary port number
<module/second-port> the secondary port number
{ on | off } set (on) or clear(off) the intermodule redundancy
[<name>] the name of the fast redundancy (default is 'fast')