Filter
Top Products
In the event of an alarm condition, the general status
screen shows an alarm message. To determine the specific
condition causing the alarm, press the alarm key on the front panel, as shown in Figure 2-21.
If there is a flashing exclamation mark (!) in the displayed message, there is additional
information to be viewed. Follow the steps as indicated in Figure 2-21.
Most alarm messages are self-explanatory; see Section 2.5 for a listing of the
most common alarm messages.
The most serious alarms are stored in the fault log, and may be viewed by following
the steps shown in Figure 2-21. To reset the alarms, press the “clear fault log”
pushbutton (see Section 2.2.3).
Figure Displaying Alarm Messages
2-21
ALARM
. . . !
(ALARM MESSAGE NUMBER 1)
!
(LAST ALARM MESSAGE)
general status screen
This message on the general status screen
indicates an alarm condition. The flashing
exclamation mark (
!) indicates that there are
alarm messages to view. To view them, press the
"alarm" pushbutton.
The last alarm message is not followed by an
exclamation mark (
!). When the "alarm"
pushbutton is pressed again, the display will
return to the general status screen.
2.3.2 Alarms
Select ENGLISH U.S. as the display language to
match the displays as presented in this manual.
IMPORTANT
2 — 25Operation
User’s guide