Filter
Top Products
This manual provides technical information required for
installation, operation and maintenance of the Topaz S3
inverters with power ratings of 0.5 kVA, 1.0 kVA, and 2kVA.
Please read this manual before operating the Topaz S3
equipment. Please retain this manual for future reference.
The manual is divided into four sections:
Section I — Introduction
This section introduces the Topaz S3 family of single phase
inverters, including a general description of the system and
its internal components, a description of available options,
and system specifications.
Section II — Installation and Operation
This section presents installation and operating information
for Topaz S3 inverters, including an overview of the system,
its components, and their function; a description of the
indicators and controls and their function; and operational
sequences to be followed for all conditions of normal,
emergency, and maintenance operation.
Section III — Theory of Operation
This section contains the elementary block diagram of the
Inverter Module and Receiver Cabinet and a brief
description of the operation of the electronics of each block.
1.0 Scope
WARNING
An AC output will be present at the output terminals immediately when
AC input is energized even without the inverter module installed in the
receiver cabinet.
ATTENTION
La tension alternative de sortie appara ît dès la mise sous tension de
le'entrée, même si le module onduleur n'est pas installé.
WARNUNG
Die Netzausgangsspannung ist unmittelbar an den
Ausgangsklemmen, sowie der Netzeingang angeschlossen wird-slebst
wenn der Einschub nicht im Gestell ist.
1 — 1Introduction
Introduction