Filter
Top Products
a. Ensure that all equipment is clean and free of loose
dust, dirt, and debris. The exterior of all enclosures
may be cleaned with a mild solution of soap and water,
lightly applied with a lint-free cloth.
b. Inspect the air intake and exhaust openings and clean
as required. Verify that air flows freely through the
equipment. Clean the air intake and exhaust openings
with compressed air or with a soft brush.
c. No further maintenance is required.
Two levels of replacement parts are available for the Topaz
S3 Inverter Systems. The two levels are designated B and
C. The level that you should keep on hand for your
installation will vary depending on the type of maintenance
planned on site, and the configuration of your Topaz S3
Inverter Systems. Having the replacement parts on hand will
prevent any unacceptable delays (due to time involved
obtaining spare parts) during critical periods, such as system
start-up. Any items used during start-up will be replaced by
MGE at no charge. Contact MGE Customer Support
Services for specific recommendations. A description of
each level is provided below:
Level Description
B This level of replacement parts is recommended when
the user can tolerate short-duration UPS downtime to
obtain replacement parts in the event of a major inverter
failure.
C This level of replacement parts is recommended when
the user can tolerate only a minimum of downtime in the
event of a major inverter failure.
Should you encounter a problem in the operation of a Topaz
S3 Inverter Systems and need MGE UPS Systems to
service your product, please take into account the following
recommendations.
To the extent that you feel comfortable with the unit, leave it
in its current state, make a record of the display lights and
messages and call either your local MGE Field Engineer or
MGE's Customer Support Services at 1-800-523-0142 for
assistance. Leaving the unit in its current state will enable
MGE's field engineers to troubleshoot your product and bring
it back on line more easily.
If you are not comfortable with the current status of the unit,
you may want to take the following actions:
4.4 Troubleshooting
and MGE Servicing
4.3 Replacement Parts
4 — 2 Maintenance and Service 86-153061-00
Topaz S3 Inverters 0.5 kVA, 1 kVA, & 2 kVA