Filter
Top Products
27
GAMMA CORRECTION menu
The proportion of the brightness of input signals to that of output signals can be corrected effectively
by adjusting GAMMA.
1. Select GAMMA CORRECTION of NORMAL menu and then press the ENTER button. (The
GAMMA CORRECTION menu appears on-screen display.)
Horizontal axis: brightness of the input signals
Vertical axis: brightness of the output signals
Inclination: GAMMA
2. Press the ª or º buttons on the control panel (or { or } buttons on the remote control) to
select MASTER.
3. Press the or buttons on the control panel (or $ or % buttons
on the remote control) to select the points brightness of the input
signals.
4. Press the ª or º buttons on the control panel (or { or } but-
tons on the remote control) to adjust the brightness of the output
signals.
5. Repeat steps 3 and 4 for another point setting.
6. Press the ENTER button.
If you wish to change the color balance, follow the steps below.
7. Press the ª or º buttons on the control panel (or { or }
buttons on the remote control) to select the desired color R, G or B.
8. Press he or buttons on the control panel (or $ or % buttons
on the remote control) to select the points brightness of the input
signals.
9. Press the ª or º buttons on the control panel (or { or }
buttons on the remote control) to adjust the brightness of the output signals.
10.
Repeat steps 3 and 4 for another point setting.
11.
Press the ENTER button.
12.
Exit the menu system by pressing the MENU button.
• To switch back to the default condition of GAMMA CORRECTION, select RESET and press the
ENTER button when the GAMMA CORRECTION display appears.
• When selecting RESET, the buttons cannot be operated for 2 to 18 seconds.
MASTER
R
G
B
RESET
GAMMA
CORRECTION
RETURN
MASTER
R
G
B
GAMMA
CORRECTION
RETURN
MASTER
R
G
B
GAMMA
CORRECTION
RETURN